Where should we send it?

DFMA Design Handbook: Part Count Reduction, Assembly Efficiency, and Process Rules is free. Tell us who you are and the download unlocks right away.

We use your details to send this file and, if you ticked the box, the newsletter. No sharing, no spam. See the privacy policy.

Edition
BundlePersonal licence

The handbook, the workbook and a deck of flashcards

The full DFMA Design Handbook plus a protected Excel workbook with design for assembly, design for manufacturing and DFMA kept apart (scorers, molded-part checks, cooling and clamp, ISO 20457 note, stack-up, process cost at three volumes, a learning curve and a dashboard), 27 printable flashcards, a guide and a weld calculator. A zip.

dfma-pro-handbook-design-kit.zip

DFMA Pro Kit cover
Type
Bundle
Format
ZIP archive
Download size
3 MB zip
Price
$9.99
License
Personal licence
What's inside

What is in the bundle

  • Design for assembly

    A baseline and a redesign scorer with the handbook's own weights, takt time and line balance.

  • Design for manufacturing

    Molded-part ratios, cooling time, clamp force, shrinkage, an ISO 20457 note and a stack-up.

  • DFMA on one page

    Process cost at three volumes, every crossover, a learning curve and baseline against redesign.

  • Checklists

    Pass, Fail or N/A for each rule, by method, with the share passed.

  • 27 printable flashcards

    The three questions, the formulas and the process rules, each citing its handbook section.

  • Weld calculator and a guide

    A Python module for fillet welds, a weld checklist, and how to use each tab.

How to use it

Using the bundle

  1. 01

    Score the baseline

    List the parts, answer the three questions, score handling and insertion.

  2. 02

    Check the parts and the process

    Test molded-part ratios, cooling, clamp force and the stack-up.

  3. 03

    Judge the redesign

    Read the dashboard: efficiency, cost at three volumes and the payback volume.

The kit puts the handbook’s method into tools you can use at the desk and in the design review.

In the zip

  • The handbook, the full 68-page PDF.
  • DFMA-Design-Workbook.xlsx with thirteen tabs in three groups, kept apart: DFA (design for assembly: a baseline and a redesign scorer, a comparison, takt time and line balance, a checklist), DFM (design for manufacturing: molded-part checks, cooling time and clamp force, moulding shrinkage and the ISO 20457 note, a tolerance stack-up, manufacturing checklists) and DFMA (cost per unit of up to three processes at three volumes and every crossover, a learning curve, a one-page baseline against redesign dashboard, a release checklist).
  • dfma-flashcards.pdf, 27 cards for printing on A4, two-sided, and a single-card-flashcards folder with each card as its own PDF (front and back separately).
  • A guide that walks the handbook’s worked examples through each tab: read the guide first (PDF, 7 pages, free).
  • weld-calculator, a Python module for fillet weld size, filler, arc time and cost, with a weld checklist and a sample file.

How the workbook behaves

Yellow cells are inputs and green cells are formulas. Every tab is protected, so only the yellow cells can be edited. All lengths are in millimetres, and there are no macros. OK is green and OUT is red wherever a result is tested against a limit.

No resin, material or process data is built in: diffusivity, cavity pressure, shrinkage, piece cost and tooling are inputs that you take from your data sheet, your quote or a measurement. The design for assembly scoring uses the handbook’s own weights, not the published Boothroyd and Dewhurst tables.

The workbook and the calculator are aids. Your supplier’s data, the standards that apply to your product and your contract govern.

Preview

The bundle at a glance

DFA_Baseline: parts, the three questions, scores and efficiency.
DFA_Line: takt time, stations and line efficiency.
DFM_Molding: rib, radius, draft, wall and boss ratios.
DFM_Cooling_Clamp: cooling time and clamp force.
DFM_Tolerance: shrinkage, ISO 20457 note and stack-up.
DFMA_Process_Volume: cost at three volumes and crossovers.
DFMA_Dashboard: baseline against redesign.
Flashcards for the three questions.
Flashcards for efficiency, time per part, takt and balance.
Flashcards for molding, cooling, volume and stack-up.
Pages 1 and 2 of the guide.
Pages 3 and 4 of the guide.

Get the bundle

About 3 MB zip.

dfma-pro-handbook-design-kit.zip

FAQ

Questions, answered

What do I need to open the workbook?

Excel 2010 or later, or LibreOffice. There are no macros.

Why are the sheets protected?

So a formula cannot be overwritten by accident. Only the yellow input cells can be edited. Review, Unprotect Sheet turns protection off; there is no password.

Is a resin or material database built in?

No. Diffusivity, cavity pressure, shrinkage, piece cost and tooling are inputs that you take from your data sheet or your quote.

Do I get the handbook too?

Yes, the full handbook PDF is in the zip.

DFMADFMDFADesign for AssemblyProduct CostManufacturingAssemblyInjection MoldingTolerance Stack-upHandbook

Share this engineering resource

Recommend this handbook to colleagues.