Skip to main content
Md Anamul Hasan
HomeAboutServicesResumePortfolioBlogResourcesContact
HomeAboutServicesResumePortfolioBlogResourcesContact
  1. Home
  2. Legal & Licensing
  3. Engineering & Legal Disclaimers
Disclaimers Effective: 2026-10-30 Updated: 2026-10-30 3 min read

Engineering & Legal Disclaimers

Professional-use, calculation, safety, financial and software disclaimers for the products and free resources on this site. The code of the disclaimer that applies (for example D-ENG) is printed on each product listing.

All Legal Docs

Engineer of record

Results never replace a qualified engineer's review.

Safety-critical work

Pressure, lifting and structural work needs formal sign-off.

Education, not advice

Financial and screening content is not investment or religious advice.

Independent

Not affiliated with or endorsed by the companies whose names appear.

D-ENG: Engineering calculations, CAD and documents

These products are productivity aids that apply published engineering methods as described in their documentation. They do not replace engineering judgement, the codes that apply to your project, physical testing, or review by a qualified professional engineer or chartered engineer.

You are responsible for checking every input, result, drawing, flat pattern and bill of materials before you manufacture, fabricate, build or rely on it. Standards such as ASME, ISO, DIN and others are cited for reference. Hold and check the current edition you are required to use.

D-PV: Pressure equipment, lifting and structures

Pressure vessels, piping, welded and structural frames, and lifting equipment are regulated almost everywhere. Results from these calculators, workbooks and scripts must be reviewed and signed off by a competent engineer under the code that applies (for example ASME BPVC, EN 13445, AISC 360 or EN 1993) before fabrication, testing or commissioning.

D-FIN: Financial and screening content

Articles, workbooks and scripts about markets or stock screening are analytical and educational. They are not investment, tax or legal advice and are not a recommendation to buy or sell anything. Outputs depend on your inputs and assumptions, and the past does not predict the future. Screening methods follow the standards they cite and are not a religious ruling, so ask a qualified scholar if that matters to you. If you publish research, you are responsible for your regulator’s disclosure rules.

D-SAFE: Electrical, batteries and hardware

Anything involving batteries, mains or low-voltage electronics, or physical builds can cause fire, shock or injury. Use it only if you are competent to, with the right protective gear and approved components, and never leave charging batteries unattended. 3D-printed or home-built parts are not certified for safety-critical use.

D-CODE: Software, scripts and utilities

Software, macros and scripts are provided “as is”. Test in a safe copy first and keep backups before running anything that changes files, settings or the registry. Run diagnostic and audit tools only on machines and networks you are authorised to test or administer. You are responsible for your own security review, secrets handling and legal compliance.

D-TEMPLATE: Quality and governance templates

Checklists, procedures and templates follow common practice and recognised standards such as ISO 9001, but they are not certified by any standards body. Adapt and audit them for your own quality system. Approval by an auditor or regulator remains your responsibility. The author is not a certification body.

Trademarks

SOLIDWORKS is a registered trademark of Dassault Systèmes. Siemens NX and Teamcenter are trademarks of Siemens. Microsoft Excel is a trademark of Microsoft. ISO and IEC names belong to the International Organization for Standardization, ASME to The American Society of Mechanical Engineers, and VDI to the Verein Deutscher Ingenieure. Other names belong to their owners.

This site and its products are independent and are not affiliated with, sponsored by or endorsed by these companies.

Questions Regarding This Agreement?

If you have any questions regarding licence scopes, commercial output usage, refund claims, or technical guarantees, write to us directly.

Contact Licensing Desk
Md Anamul Hasan

Mechanical Design Engineer, CSWE & PLM Project Manager

CAD automation, PLM architecture and machine design from first principles.

Quick Links

  • Services Hub
  • Portfolio
  • Technical Blog
  • Engineering Resources
  • Professional Resume

Specializations

  • CAD Automation (SolidWorks / NX)
  • PLM & Teamcenter Implementation
  • Mechanical Design & DFMA Consulting
  • All Engineering Services

Contact

  • contact@mdanamulhasan.com
  • Dhaka, Bangladesh
  • Available for select projects

Engineering Notes & Releases

Practical CAD automation guides, PLM architecture patterns, and free engineering reference charts delivered quarterly.

SOLIDWORKS is a registered trademark of Dassault Systèmes. NX and Teamcenter are trademarks of Siemens. Proxmox is a registered trademark of Proxmox Server Solutions GmbH. Other names and brand logos are trademarks of their respective owners. This website and its resources are independent and not affiliated with, sponsored by, or endorsed by these companies.

© 2026 Md Anamul Hasan. All rights reserved.

Buy me a coffee
Legal HubTerms of SaleEULASchedulesDisclaimersRefundsPrivacyCookies