The handbook, the workbooks and a deck of flashcards
The full ASME Y14.5-2018 GD&T Handbook plus two protected Excel workbooks (position check from CMM data, bonus tolerance and virtual condition, fasteners, gage sizing, runout, stack-ups and a Monte Carlo check), 36 printable flashcards and a guide to using them. A zip.
gdt-pro-handbook-inspection-kit.zip


- Type
- Bundle
- Format
- ZIP archive
- Download size
- 5 MB zip
- Price
- $9.99
- License
- Personal licence
What is in the bundle
Position check from CMM data
Offsets, needed zone, bonus, allowed zone and PASS or FAIL for up to 20 features.
Bonus, virtual and resultant condition
For holes and pins, at MMC, LMC or RFS, with the bonus table.
Fasteners and gages
Floating and fixed fasteners, and Go and NOGO gage sizes with the Y14.43 tolerance.
Stack-ups
Worst case, RSS and a Monte Carlo check of a gap, and a stack of position tolerances.
36 printable flashcards
Every symbol, the two rules and four key ideas, each citing its Y14.5-2018 paragraph.
A guide to the kit
How to use each tab and print the cards.
Using the bundle
- 01
Buy once
Your download link appears right after checkout and is emailed to you.
- 02
Unzip
The handbook, two workbooks, the flashcards and the guide.
- 03
Start with the guide
It walks the handbook's own examples through each tab.
The kit puts the handbook’s calculations into tools you can use at the desk or in the inspection room.
In the zip
- The handbook, the full 92-page PDF.
GDT-Inspection-Workbook.xlsxwith seven tabs: bonus tolerance and virtual condition, a position check from CMM coordinates, fasteners, gage sizing, runout, the 3-2-1 datum plan and the ten-point drawing audit.GDT-Tolerance-Stackup-Workbook.xlsxwith a one-dimensional stack, a stack of position tolerances and a Monte Carlo check.gdt-flashcards.pdf, 36 cards for printing on A4, two-sided, and asingle-card-flashcardsfolder with each card as its own PDF (front and back separately).- A guide that walks the handbook’s own worked examples through each tab: read the guide first (PDF, 6 pages, free).
How the workbooks behave
Yellow cells are inputs and green cells are formulas. Both workbooks are protected, so only the yellow cells can be edited. All lengths are in millimetres, and there are no macros. PASS is green and FAIL is red wherever a verdict appears.
The paragraph numbers cited are those of ASME Y14.5-2018, and ASME Y14.43-2011 for gages.
The workbooks are calculation aids. The drawing, the current standard and your contract govern.
Related
- ISO 286 Limits and Fits Wall Chart: the size tolerances that sit beside the geometric ones.
- Bolt and Screw Size Chart: metric and inch thread sizes for the fastener tab.
- Mechanical Design Data Handbook: fits, fasteners and material tables.
The bundle at a glance
Get the bundle
About 5 MB zip.
gdt-pro-handbook-inspection-kit.zip
Questions, answered
What do I need to open the workbooks?
Excel 2010 or later, or LibreOffice. There are no macros.
Why are the sheets protected?
So a formula cannot be overwritten by accident. Only the yellow input cells can be edited. Review, Unprotect Sheet turns protection off; there is no password.
Do I get the handbook too?
Yes, the full handbook PDF is in the zip.
Share this engineering resource
Recommend this handbook to colleagues.
Keep Exploring
Related Resources

DFMA Design Handbook: Part Count Reduction, Assembly Efficiency, and Process Rules
A 68-page handbook for design for manufacturing and assembly: the three part-count questions, design efficiency, handling and insertion, joining and line balance, process rules for machining, molding, casting, sheet metal, welding, forging, extrusion and printing, tolerance stack-up, process choice by volume, injection mold design in depth and a complete redesign. PDF.

Mechanical Design Data Handbook: Formulas, Checked Tables and Worked Examples
A 69-page mechanical design data handbook: SI units, sections and beams, stress and fatigue, water, steam, air and R134a tables, pipe flow, ISO fits and tolerance grades, bolts, springs, gears, bearings, heat exchangers, pumps, fillet welds and process capability, with worked examples. PDF.

